ADC Cuda 12000 Informations techniques télécharger pdf (Page 583)

100

101

Cuda 12000 IP Access Switch CLI Reference Guide

spectrum-group 579

spectrum-group

Configures or modifies a frequency hopping policy on an upstream channel. Use the no form of

the command to remove the policy from the upstream channel.

Mode

interface:cable:csi(<c/s/i>)

Syntax

spectrum-group <rule-number> upstream <channel-id>

profile <upstream-modulation-number> threshold <number>

interval <number> frequency <number>

no spectrum-group <rule-number> upstream <channel-id>

Arguments

<rule-number> Specifies the user-defined number assigned to a policy

configuration. Five policies may be configured for each

upstream channel. Values range from 1 to 5.

upstream <channel-id> Specifies the upstream channel port on which the policy set.

Valid range is 1 to 4 (1x4 modules) and 1 to 6 (1x6

modules).

profile

<upstream-modulation-number>

Specifies the modulation profile number to which the policy

configuration is set.

threshold <number> Specifies the percentage error threshold for this frequency

hopping policy entry. Values range from 1 to 100. For

example, if you specify 50, then the error threshold is

reached if errors occur 50 percent of the time during the

threshold interval.

interval <number> Specifies the threshold interval for this frequency hopping

policy entry in seconds. Values range from 10 to 86400.

frequency <number> Specifies the center frequency value to be used when the

error threshold is reached in the configured threshold

interval time. Values range from 5.0 to 42.0.

1 2 ... 578 579 580 581 582 583 584 585 586 587 588 ... 651 652

ADC Cuda 12000 Informations techniques Page 583

Commentaires sur ces manuels

ADC Cuda 12000 Informations techniques Page 583

Commentaires sur ces manuels

Produits connexes et manuels pour Commutateurs de réseau ADC Cuda 12000