ADC Cuda 12000 Informations techniques télécharger pdf (Page 203)

100

101

Cuda 12000 IP Access Switch CLI Reference Guide

ip ospf dead-interval 199

ip ospf dead-interval

Configures the dead-interval for the current OSPF interface. The dead interval is the interval at

which hello packets must not be seen before neighbors declare the router down. Note the

following:

■ You execute this command from IP interface mode.

■ Once within this mode, you must specify the IP interface to which you want to apply the

OSPF configuration using the ip address command.

■ You must have already defined one or more ospf areas with the ospf area command within

router:ospf mode. You must apply an ospf area to the current interface using the ip ospf

area-id before you use this command.

■ Use the show ip ospf command to display the OSPF configuration for the current interface.

Mode

interface:<type>:csi(<c/s/i>):ip-address(<ip-address>)#

Syntax

ip ospf dead-interval <seconds>

Arguments

<seconds> Interval, in seconds. You must set the same value for all participating

OSPF routers on the network. Valid range is 0 to 2147483647

seconds. The default is 40.

1 2 ... 198 199 200 201 202 203 204 205 206 207 208 ... 651 652

Commentaires sur ces manuels

Pas de commentaire

ADC Cuda 12000 Informations techniques Page 203

Commentaires sur ces manuels

Produits connexes et manuels pour Commutateurs de réseau ADC Cuda 12000