ADC Cuda 12000 Informations techniques télécharger pdf (Page 189)

100

101

Cuda 12000 IP Access Switch CLI Reference Guide

ip filter 185

ip filter

Enables and disables IP packet filtering on the selected cable interface. Access lists can be applied

to incoming or outgoing packets. When disabled, any access lists applied to an interface are

ignored and all packets pass. If enabled, the filtering rules are applied.

Note that filtering is automatically enabled when you apply a filter to an interface using the

access-class command, but it is not automatically disabled when the filter is removed. To disable

packet filtering, you must do so with the ip filter command.

Mode

interface:cable:csi(<c/s/i>)

Syntax

ip filter {in | out} {enable | disable}

Arguments

Example

The following example enables packet filtering of inbound packets on cable interface 1/1/1

and disables filtering of outbound packets on the same interface.

in Specified the inbound interface.

out Specified the outbound interface

enable Enables packet filtering on the inbound or outbound interface.

disable Disables packet filtering on the inbound or outbound interface.

cli:172.16.19.10:interface:cable:csi(1/1/1)# ip filter in enable

cli:172.16.19.10:interface:cable:csi(1/1/1)# ip filter out disable

cli:172.16.19.10:interface:cable:csi(1/1/1)#

1 2 ... 184 185 186 187 188 189 190 191 192 193 194 ... 651 652

ADC Cuda 12000 Informations techniques Page 189

Commentaires sur ces manuels

ADC Cuda 12000 Informations techniques Page 189

Commentaires sur ces manuels

Produits connexes et manuels pour Commutateurs de réseau ADC Cuda 12000