ADC Cuda 12000 Informations techniques télécharger pdf (Page 44)

100

101

ADC Telecommunications, Inc.

40 C

HAPTER 1: ABOUT THE COMMAND LINE INTERFACE

RIP Configuration Mode

RIP (Routing Information Protocol) is a broadcast-based protocol used by

routers to update routing tables, which include information about the

networks that are in their routing tables. The routing table is broadcast to

the other routers on the network where RIP is configured over IP.

The Cuda 12000 supports RIP version 2 as defined in RFC 1724. The Cuda

can interoperate in a network of both RIPv1 and RIPv2 routers. A network

composed of RIPv1 and RIPv2 routers is useful in supporting the transition

from older routers to newer routers supporting RIPv2.

In order to exchange RIP routes over an interface you must configure RIP

over IP on that interface. After RIP is added to the interface, the Cuda 12000

begins to exchange RIP routes with adjacent RIP routers.

To enter RIP configuration mode, type router rip from any mode, or type rip

from router mode.

RIP configuration mode allows you to enter RIP import and export route filter

modes using the import and export commands. It does not allow you to set

global parameters. RIP parameters are configured on a per-IP-interface basis

within IP interface mode by means of the ip rip command.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 651 652

ADC Cuda 12000 Informations techniques Page 44

Commentaires sur ces manuels

ADC Cuda 12000 Informations techniques Page 44

Commentaires sur ces manuels

Produits connexes et manuels pour Commutateurs de réseau ADC Cuda 12000