ADC 6021 Spécifications télécharger pdf (Page 97)

MYXPM6021*

Revision 1.1 - 10/21/14

*Advanced information. Subject to change without notice.

MYXPM6021*

Form #: CSI-D-685 Document 011

21 Debug Ports

Thereare2debugports,onefortheSVIDandanotheronefortheI2Cinterface.

21.1 SVID Debug Port

Whenin SVIDdebugmode, thePMIC SVID buffersconnectedto theSOC/CPUwill bedisabledand communication

is redirected to an external bus master using a secondary set of pins. This will enable external control of the PMIC

interfacewithoutanySOC/CPUbuscontention.Inaddition,thedebugchannelenablesapointtopointbustopology

withtheexternalbusmaster,therebyprovidingcleansignalintegrity.TheDEBUG_CSsignalisusedtodisableSOCSVID

transmissionduringdebug.ThiswillensurethattheSOCdoesnothangwaitingforPMICSVIDresponses.

Figure 41: SVID Debug Port Bus Diagram

1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 112 113

Pas de commentaire

ADC 6021 Spécifications Page 97