Adc Optical Normal Through Panel Pro Patch Manuel d'utilisateur télécharger pdf (Page 1)

w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1

SPEC SHEET

Pro Patch

Optical Normal Through Panel

ADC’s Optical Normal Through Panel is the latest addition to its Pro Patch line of broadcast

patching products. This fiber panel is designed to provide patch by exception, normal through

functionality, similar to copper-based patch panels. Traditional fiber patch panels require a fiber

jumper to be in place at all times. With this newly designed panel, however, all fiber “Source”

and “Destination” connections are on the rear of the panel, with a normal through connection

between the “Source” and “Destination” ports. For greater convenience and reliability, patch and

monitoring capabilities are accessed on the front of the panel.

Module Front Module Rear Chassis Open

Features

Two density options:

• The 3RU chassis houses 6 modules to

provide 24 fiber terminations (12 pairs)

using simplex connectors (SC, FC, ST).

• The 4RU chassis houses 6 modules to

provide 48 fiber terminations (24 pairs)

using small-form-factor connectors (LC).

Functionality:

• Each module contains pairs of “Source” and

“Destination” fibers plus optional monitor

ports and a switch for emergency patching.

• Accommodates 1310 and 1550 singlemode

wavelengths (switch wavelength range is

1290-1330 and 1525-1610).

• Connector ports on front and rear may be

SC, FC, ST or LC.

• IL through module is approximately 0.5 dB

(final specifications TBD).

• Module port is configurable to 90/10, 95/5

or 99/1 split ratios.

Module specifications:

• Modules may be added to the chassis

as needed.

• “Source” and “Destination” terminations

may be made by either splicing raw cable

to pigtails attached to the modules or by

routing connectorized patch cords to the

back of the modules.

• Manual switch on front of module to

change to “Patched” operation.

• LED indicators for “Normal” and

“Patched” operations.

• Modules are available with or without

monitor ports on the front.

Chassis specification:

• 19" EIA flush mounting

• Hot swappable power supply

to power switches inside modules

• 110/220 IEC interface

1 2 3 4

Résumé du contenu

Page 1 - SPEC SHEET

w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1SPEC SHEETPro PatchTMOptical Normal Through PanelADC’s Opti

Page 2 - Optical Normal Through Panel

2w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1Pro PatchTM Optical Normal Through PanelModule SchematicsT

Page 3

3w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1The information below explains the ordering numbers contai

Page 4

SPEC SHEETPro Patch™ ModulesThe information below explains the ordering numbers contained in the charts on this page.Catalog NumberPPO-M __ __ __ __ _

Commentaires sur ces manuels

Pas de commentaire

Adc Optical Normal Through Panel Pro Patch Manuel d'utilisateur Page 1

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Matériel Adc Optical Normal Through Panel Pro Patch. ADC Optical Normal Through Panel Pro Patch User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Adc Optical Normal Through Panel Pro Patch Manuel d'utilisateur Page 1

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Matériel Adc Optical Normal Through Panel Pro Patch. ADC Optical Normal Through Panel Pro Patch User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel Adc Optical Normal Through Panel Pro Patch